# Need help with sending req to API mutliple times **URL:** \ **Category:** Questions\ **Tags:** make-api, http, google-sheets, api, connections\ **Created:** [November 27, 2023, 4:04am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355 "2023-11-27T04:04:19Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![itsmeayyub](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/itsmeayyub/32/19848_2.png) [@itsmeayyub](https://community.make.com/u/itsmeayyub)\ **Post date:** [November 27, 2023, 4:04am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/1 "2023-11-27T04:04:19Z")
So I’m using HTTP to get data from API. I have 300 accounts in that API. The API limit is 100 at a time. **This is my scenario:** HTTP (Get data from API) \> Paste the data into google sheet. I’m looking for a thing, after google sheet - it will send req to API again until all the data is fetched/written in google sheet. What’s the best way to do it? I’m using smartlead API to get my account data. Check API documentation [here](https://api.smartlead.ai/reference/fetch-all-email-accounts-associated-to-a-user) Check API Limit [here](https://api.smartlead.ai/reference/rate-limits) ![image](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/0/2/02ecfabd25188374ebbac7e3402e9c930fd45875.png) This is what it looks like at the moment. I’m doing each req with a 100 limit. Right now I have done a total of 400, but in the future, it might be 1000 data I need. I need the dynamic lopping mechanism if we can do it. ---
**Author:** ![samliew](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/samliew/32/13327_2.png) [@samliew](https://community.make.com/u/samliew)\ **Post date:** [November 27, 2023, 5:00am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/3 "2023-11-27T05:00:57Z")
You can use a repeater to repeat the HTTP module 3 times: ![Screenshot_2023-11-27_121146](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/1/6/16c5cce7a656a536f16545c6b406b27a695a5f2f.png) ### Start from 0, and increment by 100 ![Screenshot_2023-11-27_121156](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/e/7/e7dac76c591df364402f2ea9a8172eccc2bb33bb.png) ### In the HTTP module, your `offset` parameter is set to the repeater value. ![Screenshot_2023-11-27_121143](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/2/4/24a78e2072375bb656e058f35187d1954bf03602.png) ## The repeater goes here ![02ecfabd25188374ebbac7e3402e9c930fd45875](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/2/8/28be65cb13d482537eed619c06ecdcb294c04db2.png) You can delete the additional routes. ---
**Author:** ![itsmeayyub](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/itsmeayyub/32/19848_2.png) [@itsmeayyub](https://community.make.com/u/itsmeayyub)\ **Post date:** [November 27, 2023, 5:04am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/4 "2023-11-27T05:04:20Z")
![image](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/7/c/7cf48b13d0c67f1232da5a4b71bac2a280fc8e9c.png) Should I remove the offset and limit from HTTP req? ---
**Author:** ![samliew](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/samliew/32/13327_2.png) [@samliew](https://community.make.com/u/samliew)\ **Post date:** [November 27, 2023, 5:04am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/5 "2023-11-27T05:04:46Z")
> [@itsmeayyub](#): > > Should I remove the offset and limit from HTTP req? No, see my third screenshot. ---
**Author:** ![itsmeayyub](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/itsmeayyub/32/19848_2.png) [@itsmeayyub](https://community.make.com/u/itsmeayyub)\ **Post date:** [November 27, 2023, 5:09am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/6 "2023-11-27T05:09:32Z")
I have been trying to figure this out for the last 3 days. You’re a life saver brother @samliew I know that you have mentioned learning [make.com](http://make.com) from [make.com](http://make.com) academy. I’m just curious where did you learn [make.com](http://make.com) and how much exp you? The reason I asked cuz I’m impressed by your answer. Once again thank you so much 🙏🙏 ---
**Author:** ![samliew](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/samliew/32/13327_2.png) [@samliew](https://community.make.com/u/samliew)\ **Post date:** [November 27, 2023, 5:14am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/7 "2023-11-27T05:14:19Z")
No problem, glad I could help! In future, please create a new thread for each question. This makes it easier for others with the same problem to search for the answer. Thank you for your cooperation! The [Make Community guidelines](https://community.make.com/t/make-community-the-ultimate-topic/11682) encourages users to try to **mark helpful replies as solutions** to help keep the Community organized. This marks the topic as solved, so that: - others can _save time_ when catching up with the latest activity here, and - allows others to _quickly jump to the solution_ if they come across the same problem To do this, simply click the checkbox at the bottom of the post that answers your question: ![Screenshot_2023-10-04_161049](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/5/d/5d9b26fbef0fd7385a34084f61cd5b9165786f42.png) > [@itsmeayyub](#): > > I’m just curious where did you learn make.com and how much exp you? I learnt everything about Make from the [Make Help Center](https://www.make.com/en/help). I also did the tutorials in the [Make Academy](https://academy.make.com), and completed the [Make Partner Training](https://partnertraining.make.com). I just got started with Make in August this year – you just gotta **set aside some time to learn** all there is from the links above! ---
**Author:** ![Make\_Bot](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/make_bot/32/14661_2.png) [@Make\_Bot](https://community.make.com/u/Make_Bot)\ **Post date:** [December 11, 2023, 6:08am UTC](https://community.make.com/t/need-help-with-sending-req-to-api-mutliple-times/20355/8 "2023-12-11T06:08:23Z")