# Redirect URI Mismatch — https://www.integromat.com/oauth/cb/google-restricted when connecting Gmail **URL:** \ **Category:** Questions\ **Tags:** connections\ **Created:** [October 15, 2025, 7:11pm UTC](https://community.make.com/t/redirect-uri-mismatch-https-www-integromat-com-oauth-cb-google-restricted-when-connecting-gmail/94134 "2025-10-15T19:11:42Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![M\_Hassan\_Idrees](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/m_hassan_idrees/32/79369_2.png) [@M\_Hassan\_Idrees](https://community.make.com/u/M_Hassan_Idrees)\ **Post date:** [October 15, 2025, 7:11pm UTC](https://community.make.com/t/redirect-uri-mismatch-https-www-integromat-com-oauth-cb-google-restricted-when-connecting-gmail/94134/1 "2025-10-15T19:11:42Z")
Hi everyone, I’m running into an issue when trying to connect my **Gmail account** to **[Make.com](http://Make.com)**. During the authentication step, I receive the following error: ```auto You can’t sign in because MyEmailApp sent an invalid request. You can try again later, or contact the developer about this issue. Learn more about this error If you are a developer of MyEmailApp, see error details. Error 400: redirect_uri_mismatch ``` In my Google Cloud Console, I’ve configured the redirect URI as: ```auto https://www.integromat.com/oauth/cb/google-restricted ``` However, Gmail authentication fails each time with the above error. Before switching it, I want to confirm — 👉 Is `https://www.integromat.com/oauth/cb/google-restricted` still the correct redirect URI for Gmail integrations in [Make.com](http://Make.com)? Or should I be using another one like `https://www.integromat.com/oauth/cb/google` or a region-specific URI (e.g. EU1)? Any guidance or confirmation from the Make team or community members who recently set this up would be greatly appreciated. Thanks in advance! ![image](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/4/c/4c6d0533948f7298e121070bc52db14b25491029.png) ![image](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/b/e/be2d9a178a9dc1910608a21852fb8a5655410ce6.png) ![image](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/0/5/05ca7d8a05be5ed905d959c714fb3081fa83efe4.png) ---
**Author:** ![samliew](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/samliew/32/13327_2.png) [@samliew](https://community.make.com/u/samliew)\ **Post date:** [October 16, 2025, 6:10am UTC](https://community.make.com/t/redirect-uri-mismatch-https-www-integromat-com-oauth-cb-google-restricted-when-connecting-gmail/94134/4 "2025-10-16T06:10:57Z")
Welcome to the Make community! Try inserting all the known redirect URIs below. That way you can reuse the same GCP app for all the Google Cloud APIs. # How to Connect and Use Google APIs in Make! # 0. Prerequisites - ## 0.1. You need to have a Google account Make sure you can sign in to [Google Cloud Console](https://accounts.google.com/v3/signin/identifier?continue=https%3A%2F%2Fconsole.cloud.google.com&flowName=GlifWebSignIn) with this. - ## 0.2. Create a Google Cloud Platform (GCP) project Follow this main help centre guide on [How to set up a custom OAuth 2.0 custom app in Make](https://www.make.com/en/help/apps/it-and-development/g-suite-admin#connecting-to-google-services-using-oauth2). # 1. Enable Google APIs - ## 1.1. Enable the relevant APIs that you want to use **Search for the relevant Google API here:** [https://console.cloud.google.com/apis/library](https://console.cloud.google.com/apis/library) - Go to each API page that you want to use, end click “Enable” - Usually you’ll want to enable at least [Drive](https://console.cloud.google.com/apis/api/drive.googleapis.com) (includes Docs/Sheets) and [Gmail](https://console.cloud.google.com/apis/api/gmail.googleapis.com). ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/d/4/d4727c4eee0426b3415b3cc285eb46d47d9dc6ad.png) * * * # 2. OAuth Client **Direct Link:** [https://console.cloud.google.com/apis/credentials](https://console.cloud.google.com/apis/credentials) - ## 2a. Create “OAuth client ID” Credentials ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/0/c/0c29e0e6bb6d6b4b62461a894fb490c1e06dd048.png) - ## 2b. Insert all the Google Redirect URIs for your app ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/2/8/2807e342c37d019fedbe8847450f96a19c696ffe.png) ### Insert All Google Redirect URIs Here are some commonly-needed redirect URIs you need for your [Google Cloud Console](https://console.cloud.google.com/) OAuth app. If you set these up, you can reuse the same GCP app for other Google apps and modules on Make. ```plaintext https://www.make.com/oauth/cb/oauth2 https://www.make.com/oauth/cb/google https://www.make.com/oauth/cb/google/ https://www.make.com/oauth/cb/google-email https://www.make.com/oauth/cb/google-custom https://www.make.com/oauth/cb/google-restricted https://www.make.com/oauth/cb/google-cloud-speech https://www.make.com/oauth/cb/google-search-console https://www.make.com/oauth/cb/google-analytics-4 https://www.make.com/oauth/cb/google-ads2 https://www.make.com/oauth/cb/google-ads2/ https://www.make.com/oauth/cb/youtube https://www.make.com/oauth/cb/chrome ``` #### Including These Google Redirect URIs You are also **required** to insert the legacy URLs below from the old Integromat system that not been migrated to Make yet (same as the above list, but replace “make” with “integromat”): ```plaintext https://www.integromat.com/oauth/cb/oauth2 https://www.integromat.com/oauth/cb/google https://www.integromat.com/oauth/cb/google/ https://www.integromat.com/oauth/cb/google-email https://www.integromat.com/oauth/cb/google-custom https://www.integromat.com/oauth/cb/google-restricted https://www.integromat.com/oauth/cb/google-cloud-speech https://www.integromat.com/oauth/cb/google-search-console https://www.integromat.com/oauth/cb/google-analytics-4 https://www.integromat.com/oauth/cb/google-ads2 https://www.integromat.com/oauth/cb/google-ads2/ https://www.integromat.com/oauth/cb/youtube https://www.integromat.com/oauth/cb/chrome ``` > **Note 1:** Due to inconsistencies in Make’s implementation of the connections, there are two separate entries where has one is `google` and another ending in a forward slash `google/` - you might need one or the other, so we have to use both! > **Note 2:** Once you’ve set these up, you can use/reuse the same Google OAuth App ID + Secret for all the supported Google connections and modules on Make - you’ll just have to enable the relevant [Google APIs](https://console.cloud.google.com/apis/library)! * * * # 3. OAuth consent screen **Direct Link:** [https://console.cloud.google.com/apis/credentials/consent/edit](https://console.cloud.google.com/apis/credentials/consent/edit) - ## 3a. Insert Two Authorised Domains - Insert `make.com` and `integromat.com` - Fill in other required fields - Click “Save and Continue”. - ## 3b. Add All Scopes - Click “Add or Remove Scopes” - Select 100 “Rows per page”, for each page, check all the rows, OR - Manually type in the scopes you need - Click “Update” at the bottom ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/3/e/3ebb5ef4860a9d7319450f72c21ef0d9380e7d25.png) - ## 3c. Step through and go to dashboard At the last step/page, click “ **BACK TO DASHBOARD** ” instead of “Prepare for Verification” ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/0/c/0c8fe7b5be5b0fec74f940524cefe93259806a7c.png) - ## 3d. Publish your GCP OAuth2 app You will need to set your OAuth application to “Production”, otherwise the credentials expire very frequently. - To do this, go back to “[OAuth consent screen](https://console.cloud.google.com/apis/credentials/consent)” - Then click the “ **PUBLISH APP** ” button - Then click the “ **CONFIRM** ” button ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/2/4/2457e224474366c4a1c1707cc1b79d3db4facfe0.png) * * * # 4. Create New Connection (HTTP, or respective Google module) You can find the Client ID and Client Secret in the OAuth2 app you created in GCP, on the right-hand side of where you inserted the callback URLs in step 2: ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/a/e/aeb4ff9ca8e4f5ddf3badd144b4f5a4fb19f27ef.png) - ## 4a. Specific Google module (Sheets, Docs, Drive, Gmail, etc.) Insert the GCP app client ID and secret here **BEFORE** clicking “Sign in” _(Gmail example)_ ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/c/a/caa6efb63fb50b12399549ee627da8bb29189a13.png) **OR,** - ## 4b. HTTP OAuth 2.0 Request module ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/8/9/89a1c01d161c36bc11d1e7460256be7e02258d18.png) You need a “Authorize Parameters” key of `redirect_uri` with the above Make OAuth2 callback URL. ![](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/4/3/43df2cd92abedfda53a23fc12991dbfb13eff1be.png) * * * **Related Topics:** - [Gmail/Google Drive verification issues (error 400): how to solve](https://community.make.com/t/gmail-google-drive-verification-issues-error-400-how-to-solve/27432) Hope this makes sense! If you have any more questions, just ask. — @samliew P.S.: investing some effort into the tutorials in the [Make Academy](https://academy.make.com) will save you lots of time and frustration using Make! ---
**Author:** ![M\_Hassan\_Idrees](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/m_hassan_idrees/32/79369_2.png) [@M\_Hassan\_Idrees](https://community.make.com/u/M_Hassan_Idrees)\ **Post date:** [October 16, 2025, 12:27pm UTC](https://community.make.com/t/redirect-uri-mismatch-https-www-integromat-com-oauth-cb-google-restricted-when-connecting-gmail/94134/5 "2025-10-16T12:27:00Z")
Thank you so much man. It is working well. ---
**Author:** ![samliew](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/samliew/32/13327_2.png) [@samliew](https://community.make.com/u/samliew)\ **Post date:** [October 17, 2025, 3:35am UTC](https://community.make.com/t/redirect-uri-mismatch-https-www-integromat-com-oauth-cb-google-restricted-when-connecting-gmail/94134/6 "2025-10-17T03:35:26Z")
No problem, glad I could help with "`Redirect URI Mismatch — /oauth/cb/google-restricted when connecting Gmail`"! 🙂 As you have noticed, it is important to insert **all** the known redirect URIs correctly once so you won’t have to look at it again! ### 1. Which was the most helpful post in this thread? The [Make Community guidelines](https://community.make.com/t/make-community-the-ultimate-topic/11682) encourages users to try to **mark helpful replies as solutions** to help keep this forum organised. 🙏 This marks the topic as solved, so that others can: - save time when browsing the latest activity on the forum, and - quickly jump to the solution in this topic To do this, simply click the checkbox at the bottom of the post that is the most helpful in answering your question. ![a screenshot of post menu options at the bottom of each post](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/b/d/bd1911a58c0c9e0074f905a60b1c1aec6370ba30.png) > 🔗 Here’s a _magic link_ to a list of your other “unsolved” topics: [`status:unsolved`](https://community.make.com/search?q=in%3Acreated%20status%3Aunsolved%20order%3Alatest) ### 2. Have you learnt something new? Do **bookmark** this topic so you can easily find and return to this topic in future. [![a screenshot of bookmark link at the bottom of the topic](https://europe1.discourse-cdn.com/flex013/uploads/make/original/3X/8/e/8e0b5d62ac67c4a0a73a86eed99350538182edbb.png)](https://community.make.com/my/activity/bookmarks) > 🔗 Here’s a _magic link_ to a list of your bookmarks [`/my/activity/bookmarks`](https://community.make.com/my/activity/bookmarks)! ### 3. Have a different/follow-up question? Start a new topic. Creating a new topic for each question makes it easier for others with the same problem to search for answers. You are also more likely to receive help sooner as **new topics are displayed first** on the [forum’s “new” page](https://community.make.com/new)! — @samliew ---
**Author:** ![Make\_Bot](https://dub1.discourse-cdn.com/flex013/user_avatar/community.make.com/make_bot/32/14661_2.png) [@Make\_Bot](https://community.make.com/u/Make_Bot)\ **Post date:** [October 30, 2025, 1:42pm UTC](https://community.make.com/t/redirect-uri-mismatch-https-www-integromat-com-oauth-cb-google-restricted-when-connecting-gmail/94134/7 "2025-10-30T13:42:02Z")